In the industrial sector every critical product (beams for construction, support screws, aeronautical components, automotive components, pressure vessels) should be checked to verify its integrity and compliance with applicable regulations. It is well known that a small surface crack, harmless in normal conditions, when subjected to fatigue stresses, is constantly growing in size up leading to break the component. This online course describes the principles and performance of the most common NDT used in the welding industry. The program is perfect for both students and welding professionals involved in inspection, supervision, or quality control.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will receive a certificate of attendance.

In the industrial sector every critical product (beams for construction, support screws, aeronautical components, automotive components, pressure vessels) should be checked to verify its integrity and compliance with applicable regulations. It is well known that a small surface crack, harmless in normal conditions, when subjected to fatigue stresses, is constantly growing in size up leading to break the component. The training of involved personnel in non-destructive testing is specified by the various standards such as ISO 9712, Recommended Practice no. SNT-TC-1A, NAS 410. The qualifications can be obtained for areas of product and industrial sectors as castings (c), forgings (f), welded products (w), tubes and pipes, including flat products for the manufacturing of welded pipes (t), wrought products (wp), composite materials.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will attend the exam for obtaining the qualification of NDT Level II Operator - VT method in accordance with the Recommended Practice no. SNT-TC-1A. Besides it is possible, after the successful final examination, to achieve the extensions and qualifications for PED (verification of pressure vessels).

In the industrial sector every critical product (beams for construction, support screws, aeronautical components, automotive components, pressure vessels) should be checked to verify its integrity and compliance with applicable regulations. It is well known that a small surface crack, harmless in normal conditions, when subjected to fatigue stresses, is constantly growing in size up leading to break the component. The training of involved personnel in non-destructive testing is specified by the various standards such as ISO 9712, Recommended Practice no. SNT-TC-1A, NAS 410. The qualifications can be obtained for areas of product and industrial sectors as castings (c), forgings (f), welded products (w), tubes and pipes, including flat products for the manufacturing of welded pipes (t), wrought products (wp), composite materials.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will attend the exam for obtaining the qualification of NDT Level II Operator - VT method in accordance with the standard ISO 9712. Besides it is possible, after the successful final examination, to achieve: the extensions and qualifications for PED (verification of pressure vessels), the qualification according to Recommended Practice no. SNT-TC-1A or to Company Written Practice.

In the industrial sector every critical product (beams for construction, support screws, aeronautical components, automotive components, pressure vessels) should be checked to verify its integrity and compliance with applicable regulations. It is well known that a small surface crack, harmless in normal conditions, when subjected to fatigue stresses, is constantly growing in size up leading to break the component. The training of involved personnel in non-destructive testing is specified by the various standards such as ISO 9712, Recommended Practice no. SNT-TC-1A, NAS 410. The qualifications can be obtained for areas of product and industrial sectors as castings (c), forgings (f), welded products (w), tubes and pipes, including flat products for the manufacturing of welded pipes (t), wrought products (wp), composite materials.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will attend the exam for obtaining the qualification of NDT Level II Operator - PT method in accordance with the Recommended Practice no. SNT-TC-1A. Besides it is possible, after the successful final examination, to achieve the extensions and qualifications for PED (verification of pressure vessels).

In the industrial sector every critical product (beams for construction, support screws, aeronautical components, automotive components, pressure vessels) should be checked to verify its integrity and compliance with applicable regulations. It is well known that a small surface crack, harmless in normal conditions, when subjected to fatigue stresses, is constantly growing in size up leading to break the component. The training of involved personnel in non-destructive testing is specified by the various standards such as ISO 9712, Recommended Practice no. SNT-TC-1A, NAS 410. The qualifications can be obtained for areas of product and industrial sectors as castings (c), forgings (f), welded products (w), tubes and pipes, including flat products for the manufacturing of welded pipes (t), wrought products (wp), composite materials.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will attend the exam for obtaining the qualification of NDT Level II Operator - PT method in accordance with the standard ISO 9712. Besides it is possible, after the successful final examination, to achieve: the extensions and qualifications for PED (verification of pressure vessels), the qualification according to Recommended Practice no. SNT-TC-1A or to Company Written Practice.

In the industrial sector every critical product (beams for construction, support screws, aeronautical components, automotive components, pressure vessels) should be checked to verify its integrity and compliance with applicable regulations. It is well known that a small surface crack, harmless in normal conditions, when subjected to fatigue stresses, is constantly growing in size up leading to break the component. The training of involved personnel in non-destructive testing is specified by the various standards such as ISO 9712, Recommended Practice no. SNT-TC-1A, NAS 410. The qualifications can be obtained for areas of product and industrial sectors as castings (c), forgings (f), welded products (w), tubes and pipes, including flat products for the manufacturing of welded pipes (t), wrought products (wp), composite materials.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will attend the exam for obtaining the qualification of NDT Level II Operator - MT method in accordance with the Recommended Practice no. SNT-TC-1A. Besides it is possible, after the successful final examination, to achieve the extensions and qualifications for PED (verification of pressure vessels).

In the industrial sector every critical product (beams for construction, support screws, aeronautical components, automotive components, pressure vessels) should be checked to verify its integrity and compliance with applicable regulations. It is well known that a small surface crack, harmless in normal conditions, when subjected to fatigue stresses, is constantly growing in size up leading to break the component. The training of involved personnel in non-destructive testing is specified by the various standards such as ISO 9712, Recommended Practice no. SNT-TC-1A, NAS 410. The qualifications can be obtained for areas of product and industrial sectors as castings (c), forgings (f), welded products (w), tubes and pipes, including flat products for the manufacturing of welded pipes (t), wrought products (wp), composite materials.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will attend the exam for obtaining the qualification of NDT Level II Operator - MT method in accordance with the standard ISO 9712. Besides it is possible, after the successful final examination, to achieve: the extensions and qualifications for PED (verification of pressure vessels), the qualification according to Recommended Practice no. SNT-TC-1A or to Company Written Practice.

In the industrial sector every critical product (beams for construction, support screws, aeronautical components, automotive components, pressure vessels) should be checked to verify its integrity and compliance with applicable regulations. It is well known that a small surface crack, harmless in normal conditions, when subjected to fatigue stresses, is constantly growing in size up leading to break the component. The training of involved personnel in non-destructive testing is specified by the various standards such as ISO 9712, Recommended Practice no. SNT-TC-1A, NAS 410. The qualifications can be obtained for areas of product and industrial sectors as castings (c), forgings (f), welded products (w), tubes and pipes, including flat products for the manufacturing of welded pipes (t), wrought products (wp), composite materials.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will attend the exam for obtaining the qualification of NDT Level II Operator - Radiographic Test Film Interpretation method in accordance with the Recommended Practice no. SNT-TC-1A. Besides it is possible, after the successful final examination, to achieve the extensions and qualifications for PED (verification of pressure vessels).

This course introduces dimensional metrology, improves measurement behaviours and supports good measurement practice. In addition, it explores the relevance of Dimensional Measurement to all stages of the engineering process. It covers a variety of related topics that combine measurement principles with “best practices” to present fundamental considerations for the proper selection, application, calibration and care of dimensional measurement systems. Measurement applications for Geometric Dimensioning and Tolerancing (GD&T) and assessment of measurement quality will be introduced.

The course is conducted in blended mode (theoretical part online and classroom practice) with the support of qualified University professors, in partnership with an internationally recognized professional qualification awarding body. At the end of the course the candidate will receive a certificate of attendance.